ARcare® 94180

Product Overview

ARcare® 94180 is a breathable medical grade double faced tape protected with one white and one clear PET release liner. The product is designed for bonding a medical device to a skin wear tape.

Diagram showing layered structure with release liner, adhesive, nonwoven, adhesive, and release liner.

Product Applications

The typical use for this product is adhering a medical device to a skin adhesive tape. The device side of the tape (white liner side) bonds aggressively to common medical device polymers (polycarbonate, polystyrene, polyethylene, etc.), while the skin side of the tape (clear liner side) bonds aggressively to skin tape backings (nonwovens, polyurethanes, etc.).

Features and Benefits

High MVTR double faced tape allows for breathability
Differential adhesion designed for medical device bonding to skin tapes
Easier to handle compared to transfer film

Product Construction

	Typical Values*	Description
Liner thickness	2.0 mil \| 51 μm	White PET release liner
Adhesive thickness	2.5 mil \| 64 μm	AS-205 acrylic adhesive
Nonwoven	8 gsm	White nonwoven scrim
Adhesive thickness	2.5 mil \| 64 μm	AS-203 acrylic adhesive
Liner thickness	2.0 mil \| 51 μm	Clear PET release liner
Total thickness	5.3 mil \| 135 μm	(Excluding liners)

*All stated values are nominal and should only be used as a guide for selection. They are not specifications.

SAFETY DATA

AS-205 and AS-203 are medical grade adhesives. This product has passed cytotoxicity, primary irritation, and skin sensitizations tests conducted according to ISO 10993-5 and -10 by an independent laboratory. Additional safety information is available upon request.

Technical Properties

Attribute*	Typical Values*	Test Method*
Peel to stainless steel (AS-205 side)	49 oz/in \| 14N/25mm	90 degrees, 12 ipm, 1 hour dwell
Peel to stainless steel (AS-203 side)	77 oz/inch \| 22 N/25mm	180 degrees, 12 ipm, 30 min. dwell
Moisture vapor transmission rate	220 g/m2/day	ART 4047
Release of white PET liner	23 g/2”	180 degrees, 300 ipm
Release of white PET liner	41 g/2”	180 degrees, 300 ipm
Recommended storage of unconverted product	70°F ± 20°F \| 21°C ± 11°C 50% ± 20% RH \| 50% ± 20% RH
Shelf life of unconverted product	Not to exceed two years from date of manufacture

*All stated values are nominal and should only be used as a guide for selection. They are not specifications.

Let’s Discuss Your Requirements

This field is for validation purposes and should be left unchanged.

First Name(Required)

Last Name(Required)

Company(Required)

Email Address(Required)

Phone Number(Required)

Country(Required)

Address(Required)

City(Required)

State(Required)

County/Providence(Required)

Zip Code(Required)

Business Segment(Required)

This field is hidden when viewing the form

Webpage

This field is hidden when viewing the form

Referred by

Web Lead

This field is hidden when viewing the form

lead_source_dom

Web Site

Message(Required)

I agree to Terms & Conditions and the Privacy Policy

Scientists wearing lab coats and safety goggles collaborating in a laboratory.