ARseal™ 94119
Product Applications
The typical use for this product is for bonding, laminating and assembly of in-vitro diagnostic and related membrane-based immunoassay products.
Features and Benefits
Product Construction
| Typical Values* | Description | |
|---|---|---|
| Liner thickness | 2.0 mil | 50 μm | Clear polyester release liner |
| Adhesive thickness | 1.8 mil | 46 μm | SR-29 silicone adhesive |
| Polypropylene carrier | 2.0 mil | 51 μm | Clear polypropylene film |
| Adhesive thickness | 1.8 mil | 46 μm | SR-29 silicone adhesive |
| Liner thickness | 2.0 mil | 51 μm | Clear polyester release liner |
| Total thickness | 5.6 mil | 142 μm | (Excluding liners) |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Safety Data
SR-29 adhesive has passed cytotoxicity tests conducted by an independent laboratory. Additional safety information is available upon request.
Technical Properties
| Attribute* | Typical Values* | Test Method* |
|---|---|---|
| Peel adhesion on stainless steel (both sides) | 65 oz/inch | 18 N/25mm | 180 degrees, 12 ipm, 5 min. dwell |
| Release of polyester liner (both sides) | 26 g/2”’ | 180 degrees, 300 ipm |
| Recommended storage of unconverted product | 70°F ± 20°F | 21°C ± 11°C 50% ± 20% RH | 50% ± 20% RH |
|
| Shelf life of unconverted product | Not to exceed one year from date of manufacture |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Let’s Discuss Your Requirements
