ARcare® 8026
Product Applications
The typical use for this product is bonding, laminating, and assembly of in-vitro diagnostic and related membrane based immunoassay products. This product is also suitable in applications for flexible circuits, gaskets and heaters where a thin bond line is required.
Features and Benefits
Product Construction
| Typical Values* | Description | |
|---|---|---|
| Liner thickness | 2.0 mil | 51 μm | S/F, Clear PET release liner |
| Adhesive thickness | 1.0 mil | 26 μm | SR-22, silicone adhesive |
| Liner thickness | 2.0 mil | 51 μm | S/F, Clear PET release liner |
| Total thickness | 1.0 mil | 25 μm | (Excluding liners) |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
SAFETY DATA
SR-22 has passed cytotoxicity tests conducted by an independent laboratory. Additional safety information is available upon request.
Technical Properties
| Attribute* | Typical Values* | Test Method* |
|---|---|---|
| Peel adhesion on Stainless Steel | 45 oz/inch | 12.4 N/25mm | 180 degrees, 12 ipm, 5 minute dwell |
| Release of polyester liner (1) | 27 g/2” | 180 degrees, 300 ipm |
| Release of polyester liner (2) | 14 g/2” | 180 degrees, 300 ipm |
| Recommended storage of unconverted product | 70°F ± 20°F | 21°C ± 11°C 50% ± 20% RH | 50% ± 20% RH |
|
| Shelf life of unconverted product | Not to exceed one year from date of manufacture |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Let’s Discuss Your Requirements
