ARcare® 8939
Product Applications
The typical uses for this product are bonding, laminating and assembly of in-vitro diagnostic and related membrane-based immunoassay products where consistent product thickness is critical.
Features and Benefits
Product Construction
| Typical Values* | Description | |
|---|---|---|
| Liner thickness | 2.0 mil | 50 μm | S/F polyester release liner |
| Adhesive thickness | 1 mil | 25 μm | AS-110, acrylic adhesive |
| Carrier thickness | 3 mil | 76 μm | 3 mil white polyester |
| Adhesive thickness | 1 mil | 25 μm | AS-110, acrylic adhesive |
| Liner thickness | 2.0 mil | 50 μm | S/F polyester release liner |
| Total thickness | 5 mil | 126 μm | (Excluding liners) |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Safety Data
AS-110 is a medical grade adhesive. The adhesive passed cytotoxicity and primary skin irritation tests conducted by an independent laboratory. Additional safety information is available upon request.
Technical Properties
| Attribute* | Typical Values* | Test Method* |
|---|---|---|
| Peel adhesion on stainless steel | 50 oz/inch | 14 N/25mm | 90 degrees, 12 ipm, 5 min. dwell |
| Recommended storage of unconverted product | 70°F ± 20°F | 21°C ± 11°C 50% ± 20% RH | 50% ± 20% RH |
|
| Shelf life of unconverted product | Not to exceed two years from date of manufacture |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Let’s Discuss Your Requirements
