ARcare® 92104
Product Applications
The typical use for this product is for bonding, laminating and assembly of in-vitro diagnostic and related membrane-based immunoassay products.
Features and Benefits
Product Construction
| Typical Values* | Description | |
|---|---|---|
| Carrier thickness | 3.0 mil | 76 μm | Clear polyester film |
| Adhesive thickness (top) | 1.2 mil | 30 μm | AS-110 medical grade adhesive |
| Liner thickness | 2.0 mil | 501 μm | Clear siliconized polyester release liner |
| Total thickness | 4.2 mil | 106 μm | (Excluding liner) |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
SAFETY DATA
AS-110 is an acrylic, pressure-sensitive adhesive. The adhesive was tested per ISO 10993 for cytotoxicity and primary skin irritation by an independent laboratory. Additional safety information is available upon request.
Technical Properties
| Attribute* | Typical Values* | Test Method* |
|---|---|---|
| Peel adhesion to Stainless Steel | 91 oz/in | 25 N/25mm | 180 degrees, 12 ipm, 5 min. dwell |
| Liner Release | 33 g/2 in | 180 degrees, 300 ipm |
| Recommended storage of unconverted product | 70°F ± 20°F | 21°C ± 11°C 50% ± 20% RH | 50% ± 20% RH |
|
| Shelf life of unconverted product | Not to exceed one year from date of manufacture |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Let’s Discuss Your Requirements
