ARcare® 93691
Product Construction
| Typical Values* | Description | |
|---|---|---|
| Liner thickness | 2.0 mil | 51 μm | D/F, white PET release liner |
| Adhesive thickness | 1.6 mil | 41 μm | AS-203, acrylic adhesive, skin tape side |
| Non-woven basis weight | 8 gsm | White non-woven carrier |
| Adhesive thickness | 1.3 mil | 33 μm | MA-69, acrylic hybrid adhesive, device side |
| Liner thickness | 3.0 mil | 76 μm | S/F, Clear PET release liner |
| Total thickness | 3.5 mil | 90 μm | (Excluding liners) |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
SAFETY DATA
AS-203 and MA-69 are medical grade adhesives. These adhesives passed cytotoxicity and primary skin irritation tests conducted by an independent laboratory. Additional safety information is available upon request.
Technical Properties
| Attribute* | Typical Values* | Test Method* |
|---|---|---|
| AS-203 side, peel adhesion on stainless steel | 78 oz/in | 21.5 N/25mm | 180 degrees, 12 ipm, 5 min. dwell |
| MA-69 side, peel adhesion on stainless steel | 90 oz/inch | 24.8 N/25mm | 180 degrees, 12 ipm, 5 min. dwell |
| Release of 2 mil white D/F liner | 30 g/2” | 180 degrees, 300 ipm |
| Release of 3 mil clear S/F liner | 45 g/2” | 180 degrees, 300 ipm |
| MVTR (moisture vapor transmission rate) | 200 g/ m2/ day | Payne Cup Method |
| Recommended storage of unconverted product | 70°F ± 20°F | 21°C ± 11°C 50% ± 20% RH | 50% ± 20% RH |
|
| Shelf life of unconverted product | Not to exceed 720 days from date of manufacture |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Let’s Discuss Your Requirements
