ARflow® 93234
Product Applications
The typical use for this product is in-vitro diagnostic and related membrane-based immunoassay products where enhanced wettability to water, blood and other hydrophilic liquids are required.
Features and Benefits
Product Construction
| Typical Values* | Description | |
|---|---|---|
| Backing thickness | 3.0 mil | 76 μm | Clear polyester film |
| Adhesive thickness | 1.0 mil | 25 μm | HY-33 hydrophilic heat seal adhesive |
| Liner thickness | 2.0 mil | 51 μm | Clear polyester release liner |
| Total thickness | 4.0 mil | 101 μm | (Excluding liner) |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Handling Recommendations
The hydrophilic heat seal adhesive is sensitive to surface impurities. It is recommended that the coated samples be handled using powder-free gloves and in an area that is away from dirt, silicones or other types of oils.
Technical Properties
| Attribute* | Typical Values* | Test Method* |
|---|---|---|
| Peel adhesion | 15 oz/in | 4.1 N/25mm | ART 1057 – T-peel; 12 ipm |
| Water contact angle | <10° | ART 2577 – 30 sec. dwell |
| Recommended storage of unconverted product | 70°F ± 20°F | 21°C ± 11°C 50% ± 20% RH | 50% ± 20% RH |
|
| Shelf life of unconverted product | Not to exceed two years from date of manufacture |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Let’s Discuss Your Requirements
